所有分类
  • 所有分类
  • 刷机固件
  • 维修资料
  • 视频教程
  • 刷机教程
  • 维修教程
当前位置： 正文

康佳D34A_35024372_348方案不开机打印信息

2023-10-02 维修教程

UART_115200

AC_ON
BIST0-OK
#_U
Relocation Offset is: 01700000
[AT][MB][start ub][429]

U-Boot 2011.06-svn2112 (Jul 09 2019 – 10:48:45)

msIR_Initialize
[SYS][Utopia]: Function = SYSOpen, Line = 1115, current resource pri_shm content is: 0
[SYS][Utopia]: Function = SYSOpen, Line = 1134, [SYS INFO] OPEN INSTANCE…
create instance at 293EAF18 with private size 128 bytes at 293EAF60
[MIU][Utopia]:
[MIU INFO] miu opencreate instance at 293EAFE8 with private size 80 bytes at 293EB030
create instance at 293EB088 with private size 48 bytes at 293EB0D0

uboot held at [291DDF60~2AC00000],size=01A220A0
DRAM: 172 MiB
Now running in RAM – U-Boot at: 2A200000

eMMC: HS200 200MHz
eMMC 3.68 GB [75FFF8h]
In: serial
Out: serial
Err: serial
Net: No ethernet found.
MAC: 0x88: 0x79: 0x5B: 0x93:0x91: 0x30
[CPU][Utopia]:
[CPU INFO] cpu opencreate instance at 293FB540 with private size 44 bytes at 293FB588
[CPU][Utopia]: CPUIoctl – MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[tu]: *? *? * *` *? *xV4

[AT][MBoot][Driver Init][570]
mmc change mount : system
Size of file “/etc/set_env” from mmc device 0 partition system: 646 bytes
Loading file “/etc/set_env” at offset 0x0 from mmc device 0 partition system
646 bytes read

>> setenv bootargs console

>> saveenv
Saving Environment to MMC…
Writing to MMC(0)… [ eMMC_CMD25_MIU() ] eMMC WARN: CMD25 Reg.12: FF08h, Err: 0h, Retry: 1, Arg: 3700h
eMMC Warn: slow clk to 50.0MHz, 90h
[ eMMC_CMD25_MIU() ] eMMC WARN: CMD25 Reg.12: FF08h, Err: 0h, Retry: 2, Arg: 3700h
eMMC Warn: slow clk to 50.0MHz, 90h
[ eMMC_CMD25_MIU() ] eMMC WARN: CMD25 Reg.12: FF08h, Err: 0h, Retry: 3, Arg: 3700h
eMMC Warn: slow clk to 50.0MHz, 90h
[ eMMC_CMD25_MIU() ] eMMC WARN: CMD25 Reg.12: FF08h, Err: 0h, Retry: 4, Arg: 3700h
eMMC Warn: slow clk to 50.0MHz, 90h
[ eMMC_CMD25_MIU() ] eMMC WARN: CMD25 Reg.12: FF08h, Err: 0h, Retry: 5, Arg: 3700h
eMMC Warn: slow clk to 50.0MHz, 90h
[ eMMC_CMD25_MIU() ] eMMC Err: CMD25 Reg.12: FF08h, Err: 80000A16h, Retry: 5, Arg: 3700h
[ eMMC_DumpDriverStatus() ]
eMMCDrvExtFlag: 0h

eMMC Status: 2014/03/25
MIU Mode
Polling Mode
FCIE Byte Mode
SDR Mode
FCIE Clk: 50.0 MHz, 90h
8-bits width
Bus Speed: HIGH
PwrOff Notification: OFF
[pad setting]: FCIE_MODE_8BITS_MACRO_HIGH_SPEED
FCIE_BOOT_CONFIG = 0003h
FCIE_SD_MODE = 0005h (check data sync)
reg_ckg_fcie = 006Ch

fcie reg:
00h:| 0002h 0000h 0000h BC20h 093Fh 0000h 0001h 0001h
08h:| 0080h 0200h 0505h 0005h 0006h FF08h 0003h 0080h
10h:| 0003h 0000h 0000h 0000h 0000h 0000h 03FFh 0000h
18h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
20h:| 0017h 0900h 0000h 0000h 0000h 0000h 0000h 0000h
28h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
30h:| 0000h 0000h 0000h 0000h FFFFh 0308h 0000h 0001h
38h:| 0000h 3000h 0000h 0000h 0000h 0000h 2001h 0001h

chiptop reg:
00h:| 0000h 0000h 0400h 003Fh 0000h 2000h 07FFh 2AAAh
08h:| 0000h FFFFh FFFFh 0003h 0FF0h FFFFh 07FFh DAFFh
10h:| 71F0h 7707h 0000h 0000h 0777h 0000h 0000h 0000h
18h:| 0000h 000Fh 000Fh 0000h 0000h 0010h 0000h 0000h
20h:| 0000h 0800h 0040h 0000h 0000h 0000h 0000h 0000h
28h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
30h:| 0000h 0000h 0000h 0000h FFFFh 0FFFh 07FFh 07FFh
38h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
40h:| 0001h 0000h 3F00h F91Fh 000Ch 0000h 0000h 0000h
48h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0004h
50h:| 0000h 0000h 0000h 0504h 0000h 0000h 0000h 00B0h
58h:| 1556h 0000h 0000h 0000h 0000h FFC0h 0000h 0000h
60h:| 7E00h 0000h 0000h 0000h 0024h 000Ah 07FFh 0000h
68h:| 0000h 0080h 0000h 0000h 0000h 0F0Ah 0040h 0000h
70h:| 0000h 6019h 0080h 45A9h 45A9h 0000h 0000h 0000h
78h:| 0000h 0000h 0000h 0000h 0000h 0000h 9FE6h 0010h

emmc_pll reg:
00h:| 8000h FF04h 8000h 2000h 0006h 0001h 0000h 0000h
08h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
10h:| 4000h 0000h 0000h 0000h 8000h 0000h 0000h 0000h
18h:| 03D8h 0024h 0005h 0000h 0200h 0000h 0000h 0000h
20h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
28h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
30h:| 000Ah 0032h D200h 0200h 0200h 0000h 3034h 3020h
38h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
40h:| 0000h 0000h 0000h FFFFh 0003h 0000h 0000h 0000h
48h:| 0000h 0000h 0000h 0EFFh 0000h 0000h 0000h 0000h
50h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0FFFh
58h:| 0700h 0700h 0000h 0000h 0000h 0000h 0000h 0000h
60h:| 0000h 0111h 0001h 0000h 0000h 0000h 0000h 0010h
68h:| 0001h 0000h 0000h 0000h 0002h 0000h 0000h 0007h
70h:| 00F3h FFFFh 00FFh FFFFh 80FFh 0000h 0000h 0000h
78h:| 3000h 0000h 0000h 0500h 00FFh 55AAh 0200h 0000h

clkgen reg:
00h:| 0000h 0000h 0000h 0100h 0000h 0000h 0000h 0000h
08h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
10h:| 0001h 0000h 0000h 0C00h 000Ch 0000h 0044h 0124h
18h:| 0900h 0C0Ch 0001h 0000h 0000h 0800h 0002h 0000h
20h:| 0100h 0111h 0101h 0101h 0101h 000Dh 0101h 1D01h
28h:| 0501h 0109h 1111h 0111h 0000h 0000h 0000h 0000h
30h:| 0410h 0410h 0011h 0101h 0104h 0101h 0000h 0000h
38h:| 0000h 0101h 0100h 0101h 0101h 0001h 0001h 1111h
40h:| 0000h 0100h 0001h 0000h 1111h 0011h 0000h 0000h
48h:| 0000h 0000h 0000h 0000h 0000h 0101h 0101h 0011h
50h:| 0100h 4400h 0000h 0004h 2020h 0020h 0101h 0000h
58h:| 0000h 0020h 0000h 0000h 0000h 0100h 0000h 0000h
60h:| 0000h 0000h 0000h 0101h 006Ch 0000h 0000h 0000h
68h:| 0000h 0001h 0000h 0000h 0101h 0000h 0000h 0000h
70h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
78h:| 0000h 0000h 0000h 0000h 0000h 1D00h 0001h 0000h

[ eMMC_FCIE_DumpDebugBus() ]
0x15 = 2h, 0x38 = 0h, 0x39 = 3500h
0x15 = 4h, 0x38 = 0h, 0x39 = 3500h
0x15 = 6h, 0x38 = 0h, 0x39 = 3500h
0x15 = 8h, 0x38 = 0h, 0x39 = 3500h
CMD state: 000000h
FIFO status: 000000h
ADMA Address: 000000h
ADMA blk cnt: 000000h

[ eMMC_CheckR1Error() ] eMMC Err: eMMC_ST_ERR_R1_23_16
[ eMMC_CheckR1Error() ] eMMC Err: eMMC_R1_ILLEGAL_COMMAND
0x2A9590D4: 0Dh 00h 40h 09h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h | ..@………….
[ eMMC_CMD13() ] eMMC: CMD13 check R1 error: 80000A05h, should not retry

[ eMMC_Dump_eMMCStatus() ] eMMC St: 0h 40h 9h 0h
eMMC die eMMC_FCIE_ErrHandler_Stop() Ln: 320UART_115200

AC_ON
BIST0-OK
#_U
Relocation Offset is: 01700000
[AT][MB][start ub][429]

U-Boot 2011.06-svn2112 (Jul 09 2019 – 10:48:45)

msIR_Initialize
[SYS][Utopia]: Function = SYSOpen, Line = 1115, current resource pri_shm content is: 0
[SYS][Utopia]: Function = SYSOpen, Line = 1134, [SYS INFO] OPEN INSTANCE…
create instance at 293EAF18 with private size 128 bytes at 293EAF60
[MIU][Utopia]:
[MIU INFO] miu opencreate instance at 293EAFE8 with private size 80 bytes at 293EB030
create instance at 293EB088 with private size 48 bytes at 293EB0D0

uboot held at [291DDF60~2AC00000],size=01A220A0
DRAM: 172 MiB
Now running in RAM – U-Boot at: 2A200000

eMMC: HS200 200MHz
eMMC 3.68 GB [75FFF8h]
In: serial
Out: serial
Err: serial
Net: No ethernet found.
MAC: 0x88: 0x79: 0x5B: 0x93:0x91: 0x30
[CPU][Utopia]:
[CPU INFO] cpu opencreate instance at 293FB540 with private size 44 bytes at 293FB588
[CPU][Utopia]: CPUIoctl – MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[tu]: *? *? * *` *? *xV4

[AT][MBoot][Driver Init][570]
mmc change mount : system
Size of file “/etc/set_env” from mmc device 0 partition system: 646 bytes
Loading file “/etc/set_env” at offset 0x0 from mmc device 0 partition system
646 bytes read

>> setenv bootargs console

>> saveenv
Saving Environment to MMC…
Writing to MMC(0)… [ eMMC_CMD25_MIU() ] eMMC WARN: CMD25 Reg.12: FF08h, Err: 0h, Retry: 1, Arg: 3700h
eMMC Warn: slow clk to 50.0MHz, 90h
[ eMMC_CMD25_MIU() ] eMMC WARN: CMD25 Reg.12: FF08h, Err: 0h, Retry: 2, Arg: 3700h
eMMC Warn: slow clk to 50.0MHz, 90h
[ eMMC_CMD25_MIU() ] eMMC WARN: CMD25 Reg.12: FF08h, Err: 0h, Retry: 3, Arg: 3700h
eMMC Warn: slow clk to 50.0MHz, 90h
[ eMMC_CMD25_MIU() ] eMMC WARN: CMD25 Reg.12: FF08h, Err: 0h, Retry: 4, Arg: 3700h
eMMC Warn: slow clk to 50.0MHz, 90h
[ eMMC_CMD25_MIU() ] eMMC WARN: CMD25 Reg.12: FF08h, Err: 0h, Retry: 5, Arg: 3700h
eMMC Warn: slow clk to 50.0MHz, 90h
[ eMMC_CMD25_MIU() ] eMMC Err: CMD25 Reg.12: FF08h, Err: 80000A16h, Retry: 5, Arg: 3700h
[ eMMC_DumpDriverStatus() ]
eMMCDrvExtFlag: 0h

eMMC Status: 2014/03/25
MIU Mode
Polling Mode
FCIE Byte Mode
SDR Mode
FCIE Clk: 50.0 MHz, 90h
8-bits width
Bus Speed: HIGH
PwrOff Notification: OFF
[pad setting]: FCIE_MODE_8BITS_MACRO_HIGH_SPEED
FCIE_BOOT_CONFIG = 0003h
FCIE_SD_MODE = 0005h (check data sync)
reg_ckg_fcie = 006Ch

fcie reg:
00h:| 0002h 0000h 0000h BC20h 093Fh 0000h 0001h 0001h
08h:| 0080h 0200h 0505h 0005h 0006h FF08h 0003h 0080h
10h:| 0003h 0000h 0000h 0000h 0000h 0000h 03FFh 0000h
18h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
20h:| 0017h 0900h 0000h 0000h 0000h 0000h 0000h 0000h
28h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
30h:| 0000h 0000h 0000h 0000h FFFFh 0308h 0000h 0001h
38h:| 0000h 3000h 0000h 0000h 0000h 0000h 2001h 0001h

chiptop reg:
00h:| 0000h 0000h 0400h 003Fh 0000h 2000h 07FFh 2AAAh
08h:| 0000h FFFFh FFFFh 0003h 0FF0h FFFFh 07FFh DAFFh
10h:| 71F0h 7707h 0000h 0000h 0777h 0000h 0000h 0000h
18h:| 0000h 000Fh 000Fh 0000h 0000h 0010h 0000h 0000h
20h:| 0000h 0800h 0040h 0000h 0000h 0000h 0000h 0000h
28h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
30h:| 0000h 0000h 0000h 0000h FFFFh 0FFFh 07FFh 07FFh
38h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
40h:| 0001h 0000h 3F00h F91Fh 000Ch 0000h 0000h 0000h
48h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0004h
50h:| 0000h 0000h 0000h 0504h 0000h 0000h 0000h 00B0h
58h:| 1556h 0000h 0000h 0000h 0000h FFC0h 0000h 0000h
60h:| 7E00h 0000h 0000h 0000h 0024h 000Ah 07FFh 0000h
68h:| 0000h 0080h 0000h 0000h 0000h 0F0Ah 0040h 0000h
70h:| 0000h 6019h 0080h 45A9h 45A9h 0000h 0000h 0000h
78h:| 0000h 0000h 0000h 0000h 0000h 0000h 9FE6h 0010h

emmc_pll reg:
00h:| 8000h FF04h 8000h 2000h 0006h 0001h 0000h 0000h
08h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
10h:| 4000h 0000h 0000h 0000h 8000h 0000h 0000h 0000h
18h:| 03D8h 0024h 0005h 0000h 0200h 0000h 0000h 0000h
20h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
28h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
30h:| 000Ah 0032h D200h 0200h 0200h 0000h 3034h 3020h
38h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
40h:| 0000h 0000h 0000h FFFFh 0003h 0000h 0000h 0000h
48h:| 0000h 0000h 0000h 0EFFh 0000h 0000h 0000h 0000h
50h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0FFFh
58h:| 0700h 0700h 0000h 0000h 0000h 0000h 0000h 0000h
60h:| 0000h 0111h 0001h 0000h 0000h 0000h 0000h 0010h
68h:| 0001h 0000h 0000h 0000h 0002h 0000h 0000h 0007h
70h:| 00F3h FFFFh 00FFh FFFFh 80FFh 0000h 0000h 0000h
78h:| 3000h 0000h 0000h 0500h 00FFh 55AAh 0200h 0000h

clkgen reg:
00h:| 0000h 0000h 0000h 0100h 0000h 0000h 0000h 0000h
08h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
10h:| 0001h 0000h 0000h 0C00h 000Ch 0000h 0044h 0124h
18h:| 0900h 0C0Ch 0001h 0000h 0000h 0800h 0002h 0000h
20h:| 0100h 0111h 0101h 0101h 0101h 000Dh 0101h 1D01h
28h:| 0501h 0109h 1111h 0111h 0000h 0000h 0000h 0000h
30h:| 0410h 0410h 0011h 0101h 0104h 0101h 0000h 0000h
38h:| 0000h 0101h 0100h 0101h 0101h 0001h 0001h 1111h
40h:| 0000h 0100h 0001h 0000h 1111h 0011h 0000h 0000h
48h:| 0000h 0000h 0000h 0000h 0000h 0101h 0101h 0011h
50h:| 0100h 4400h 0000h 0004h 2020h 0020h 0101h 0000h
58h:| 0000h 0020h 0000h 0000h 0000h 0100h 0000h 0000h
60h:| 0000h 0000h 0000h 0101h 006Ch 0000h 0000h 0000h
68h:| 0000h 0001h 0000h 0000h 0101h 0000h 0000h 0000h
70h:| 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
78h:| 0000h 0000h 0000h 0000h 0000h 1D00h 0001h 0000h

[ eMMC_FCIE_DumpDebugBus() ]
0x15 = 2h, 0x38 = 0h, 0x39 = 3500h
0x15 = 4h, 0x38 = 0h, 0x39 = 3500h
0x15 = 6h, 0x38 = 0h, 0x39 = 3500h
0x15 = 8h, 0x38 = 0h, 0x39 = 3500h
CMD state: 000000h
FIFO status: 000000h
ADMA Address: 000000h
ADMA blk cnt: 000000h

[ eMMC_CheckR1Error() ] eMMC Err: eMMC_ST_ERR_R1_23_16
[ eMMC_CheckR1Error() ] eMMC Err: eMMC_R1_ILLEGAL_COMMAND
0x2A9590D4: 0Dh 00h 40h 09h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h 00h | ..@………….
[ eMMC_CMD13() ] eMMC: CMD13 check R1 error: 80000A05h, should not retry

[ eMMC_Dump_eMMCStatus() ] eMMC St: 0h 40h 9h 0h
eMMC die eMMC_FCIE_ErrHandler_Stop() Ln: 320
以上是EMMC寿命到钟的打印信息.

常见问题
关于软件声明
1.本站软件难免有错误，仅供参考。
2.本站软件来自网上公开的下载，如果认为侵犯了您的权益，请出示证明是哪一条，我们会去掉侵权软件。
3.本站收集的软件版权归作者所有，只适用参详学习，请下载后在12小时内删除。谢谢您的支持！
刷机风险提示
1、建议在专业人员指导下刷机；
2、刷机有风险也有乐趣，一切源于刷机导致后果自负，智能电视刷机网概不负责；
3、本固件仅供测试和技术交流使用，请下载后12小时内删除，谢谢合作！
4、本站提供的ROM固件资源仅供用户在设备变砖及无法开机的情况下使用；
5、下载前请认真阅读《免责声明》
0

猜你喜欢

维修教程 2025-07-27

维修教程 2025-07-27

维修教程 2025-07-27

维修教程 2025-07-20

维修教程 2025-07-20

维修教程 2025-07-20

维修教程 2025-07-13

维修教程 2025-05-25
首页 资料 VIP 客服 我的
没有账号？注册  忘记密码？

社交账号快速登录

微信扫一扫关注
如已关注，请回复“登录”二字获取验证码